Honeywell Thor VM2 User Manual page 138

Options
Option
Report when connection
lost
Report when reconnected This option is Disabled (unchecked) by default.
Report failure to recon-
nect
Clear Pairing Table on
Boot
Auto Reconnect on Boot
Auto Reconnect
5 - 34
Function
This option is Enabled (checked) by default.
There may be an audio or visual signal when a connection between a paired, active
device is lost.
A visual signal may be a dialog box placed on the display notifying the user the con-
nection between one (or all) of the paired Bluetooth devices has stopped. Tap the ok
button to remove the dialog box from the screen.
There may be an audio or visual signal when a connection between a paired, active
device is made.
A visual signal may be a dialog box placed on the display notifying the user the con-
nection between one (or all) of the paired Bluetooth devices has resumed. Tap the ok
button to remove the dialog box from the screen.
This option is Enabled (checked) by default.
The default time delay is 30 minutes. This value cannot be changed by the user.
There may be an audio or visual signal when a connection between a paired, active
device fails to re-connect. A visual signal may be a dialog box placed on the display
notifying the user the connection between one (or all) of the previously paired Blue-
tooth devices has failed.
Tap the X button or ok button to close the dialog box.
Possible reasons for failure to reconnect: Timeout expired without reconnecting; at-
tempted to pair with a device that is currently paired with another device; attempted
to pair with a known device that moved out of range or was turned off; attempted to
pair with a known device but the reason why reconnect failed is unknown.
This option is Disabled (unchecked) by default.
When enabled (checked), all previous paired information is deleted upon any reboot
sequence and no devices are reconnected.
When enabled (checked) "Auto Reconnect on Boot" is automatically disabled
(dimmed).
This option is Enabled (checked) by default. All previously paired devices are recon-
nected upon any reboot sequence.
When disabled (unchecked), no devices are reconnected upon any reboot sequence.
This option is Enabled (checked) by default. This option controls the overall mobile
Bluetooth device reconnect behavior.
• When Auto Reconnect is disabled (unchecked), Auto Reconnect on Boot is
automatically disabled and dimmed.
• When Auto Reconnect is disabled (unchecked), no devices are reconnected in any
situation. The status of Auto Reconnect on Boot is ignored and no devices are
reconnected on boot. The status of Clear Pairing Table on Boot controls whether
the pairing table is populated on boot.
• When Auto Reconnect is enabled (checked) and Auto Reconnect on Boot is
disabled (unchecked), devices are not reconnected on boot, but are reconnected
in other situations (example: return from out-of-range).
• When Auto Reconnect is enabled (checked) and Clear Pairing Table on Boot is
enabled (checked), devices are not reconnected on boot, but are reconnected in
other situations (example: return from out-of-range). The pairing table is cleared
on boot. The status of Auto Reconnect on Boot is ignored and the option is
automatically disabled (unchecked) and dimmed.