Internet Explorer - Honeywell Thor VM2 User Manual

The following features are supported by the Wavelink Avalanche Enabler when used in conjunction with the Avalanche
Manager.
After configuration, Enabler files are installed upon initial bootup and after a hard reset. Network parameter configuration is
supported for:
• IP address: DHCP or static IP
• RF network SSID
• DNS hosts (primary, secondary, tertiary)
• Subnet mask
• Enabler update
Related Manual: Using Wavelink Avalanche.
The Thor VM2 has the Avalanche Enabler installation files loaded, but not installed, on the mobile device when it is
shipped. The installation files are located in the System folder on CE devices. The installation application must be run man-
ually the first time Avalanche is used.
After the installation application is manually run, a reboot is necessary for the Enabler to begin normal performance. Follow-
ing this reboot, the Enabler will by default be an auto-launch application. This behavior can be modified by accessing the
Server Contact tab of the Server Contact (page 7-7) panel.

Internet Explorer

Start > Programs > Internet Explorer
There are a few changes in the Windows CE version of Internet Explorer as it relates to the general desktop Windows PC
Internet Explorer options. Tap the "?" button to access Internet Explorer Help.
5 - 7