Power - Honeywell Thor VM2 User Manual

Power

Start > Settings > Control Panel > Power
The Thor VM2 power mode timers are cumulative.
The System Idle timer begins the countdown after the User Idle timer has expired and the Suspend timer begins the count-
down after the System Idle timer has expired.
When the User Idle timer is set to "Never", the power scheme timers never place the device in User Idle, System Idle or
Suspend modes (even when the device is idle).
The Display > Backlight setting is synchronized with the User Idle setting in the Schemes tab in the Power control panel.
Factory Default Settings
No user interaction
Battery
The default power schemes are
Schemes
AC/DC
User Idle Timeout 15 minutes
System Idle Timeout 1 hour
Suspend Timeout 8 hours
Shutdown Timeout Never
No user interaction
Device Status
Ignition Control/ Ignition Control/
Ignition On Ignition Off
15 minutes 1 minute
1 hour 5 minutes
8 hours 1 hour
Never 8 hours
Auto On UPS
15 minutes 30 seconds
1 hour 1 minute
8 hours 10 minutes
Never 20 minutes
5 - 81