Misc; Status Popup - Honeywell Thor VM2 User Manual

Misc

Options on this tab configure device specific options. Note that options not available on the Thor VM2are dimmed or
grayed out.
CapsLock
By default, CapsLock is off after a warmboot. Check this box to turn CapsLock on after a warmboot.
Touch Screen Disable
By default, the Thor VM2 touch screen is enabled. To disable the touch screen after a warmboot, click this check-
box.
Note: If the touch screen is disabled on a Thor VM2, you must use a USB mouse or keyboard attached to the Thor
VM2 to access this tab to re-enable the touch screen unless a
assigned to enable the touch screen.
Enable Keypad Backlight
By default, the keypad backlight default setting is to follow the display backlight setting until it is changed by the
user.
Click the checkbox to disable the keypad backlight.
This keypad backlight setting only applies to the integrated keypad on the Thor VM2. The keyboard backlight on
an attached USB keyboard is not affected by this setting.
USB Powered in Suspend
By default, power to attached USB devices is turned off when the Thor VM2 is in Suspend mode. Check this box
to maintain power to attached USB devices in Suspend.
The external keyboard is a USB device. If USB devices are not powered in Suspend the external keyboard back-
light turns off when the Thor VM2 enters Suspend.

Status Popup

Options on this tab configure the Status Popup window. When the Status popup window is displayed, it is placed on top
of the window in focus and hides any data beneath it. It is closed by pressing the assigned Status User or Status
Admin key sequence.
Using the Programmable Key
sequence for the end-user when they want to toggle the Status Popup Window on or off.
5 - 76
(page 5-86) control panel the System Administrator must first assign a Status User key
Programmable Key (page 5-86) has been