Draytek VIGOR2860 series User Manual page 93

Vdsl2 security firewall

Hide thumbs Also See for VIGOR2860 series:

Table of Contents

Physical Mode

After finished the above settings, click OK to save the settings.

Vigor2860 Series User's Guide

Display the physical mode of such WAN interface.

If your choose According to Line Speed as the Load Balance

Mode, please type the line speed for downloading and

uploading for such WAN interface. The unit is kbps.

Choose Always On to make the WAN2 connection being

activated always.

Load Balance: Check this box to enable auto load balance

function for such WAN interface.

When the data traffic is large, the WAN interface with the

function enabled will balance the data transmission

automatically among all of the WAN interfaces in connection

Failover – Choose it to make the WAN connection as a backup

WAN Failure – When the active WAN failed, such WAN

will be activated as the main network connection.

Traffic Threshold – When the data traffic of active

WAN reaches the traffic threshold (specified here), the

failover WAN will be enabled automatically to share the

overloaded data traffic.

If you choose Failover as the Active Mode, Active When will

appear. Please specify which WAN will be the Backup

Any of the selected WAN disconnect – Such backup WAN will

be activated when any master WAN interface disconnects.

All of the selected WAN disconnect – Such backup WAN will

be activated only when all master WAN interfaces