Draytek VIGOR2860 series User Manual page 140

Vdsl2 security firewall

Hide thumbs Also See for VIGOR2860 series:

Table of Contents

After finished the above settings, click OK to save the settings.

settings are in the range from 1 to 4095. The network traffic

flowing on each channel will be identified by the system via

their VLAN Tags. Channels using the same WAN type may not

configure the same VLAN tag value.

Priority – Choose the number to determine the packet

priority for such VLAN. The range is from 0 to 7.

QoS Type - Select a proper QoS type for the channel.

Type the values for PCR, SCR and MBS respectively.

Enable – Click it to enable Bridge mode for such channel.

Physical Members – Group the physical ports by checking the

corresponding check box(es) for applying the bridge

Vigor2860 Series User's Guide