Draytek VIGOR2860 series User Manual page 423

Source/Destination IP
Protocol
Source Port /
Destination Port
3. Click Next to get the following page.
Vigor2860 Series User's Guide
Click Edit to access into the following dialog to choose the
source/destination IP or IP ranges.
To set the IP address manually, please choose Any
Address/Single Address/Range Address/Subnet Address as
the Address Type and type them in this dialog. In addition,
if you want to use the IP range from defined groups or
objects, please choose Group and Objects as the Address
Type.
From the IP Group drop down list, choose the one that you
want to apply. Or use the IP Object drop down list to
choose the object that you want.
Specify the protocol(s) which this filter rule will apply to.
(=) – when the first and last value are the same, it indicates
one port; when the first and last values are different, it
indicates a range for the port and available for this service
type.
(!=) – when the first and last value are the same, it
indicates all the ports except the port defined here; when
the first and last values are different, it indicates that all
the ports except the range defined here are available for
this service type.
(>) – the port number greater than this value is available.
(<) – the port number less than this value is available for
this profile.
407