Draytek VIGOR2860 series User Manual page 125

I I - 1 - 2 - 1 1
I I - 1 - 2 - 1 1
It is available for "L" model only. LTE WAN uses the embedded LTE module to access internet.
To use 3G/4G USB Modem (DHCP mode) as the accessing protocol of the internet, please
choose Internet Access from WAN menu. Then, select 3G/4G USB Modem (DHCP mode) for
LTE. The following web page will be shown.
Available settings are explained as follows:
Item
3G/4G USB Modem (DHCP
mode)
SIM PIN code
Network Mode
APN Name
UserName
Password
Authentication
Vigor2860 Series User's Guide
D e t a i l s P a g e f o r 3 G
D e t a i l s P a g e f o r 3 G
Description
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
Type PIN code of the SIM card that will be used to access
Internet.
The maximum length of the PIN code you can set is 19
characters.
Force Vigor router to connect Internet with the mode
specified here. If you choose 4G/3G/2G as network mode,
the router will choose a suitable one according to the actual
wireless signal automatically.
APN means Access Point Name which is provided and
required by some ISPs. Type the name and click Apply.
The maximum length of the name you can set is 47
characters.
Type the username (optional). The maximum length of the
name you can set is 63 characters.
Type the password (optional). The maximum length of the
password you can set is 62 characters.
Select None or PAP or CHAP.
/ 4 G U S B M o d e m ( D
/ 4 G U S B M o d e m ( D
H C P m o d e ) i n L T E W
H C P m o d e ) i n L T E W
A N
A N
109