Draytek VIGOR2860 series User Manual page 63

E t h e r n e
E t h e r n e
1. Choose WAN2 as the WAN Interface and choose Ethernet as the Physical Mode. Click
the Next button. The following page will be open for you to specify Internet Access
Type.
2. Click Static IP as the Internet Access type. Simply click Next to continue.
Available settings are explained as follows:
Item
WAN IP
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Back
Next
Vigor2860 Series User's Guide
t W A N 2 - S t a t i c I P
t W A N 2 - S t a t i c I P
Description
Type the IP address.
Type the subnet mask.
Type the IP address of gateway.
Type in the primary IP address for the router.
Type in secondary IP address for necessity in the future.
Click it to return to previous setting page.
Click it to get into the next setting page.
47