Draytek VIGOR2860 series User Manual page 217

Authentication
User Profile
Synchronize Internal
RADIUS user list to Local
802.1X user list
After finished the above settings, click OK button to save the settings.
I I - 5 - 5 - 3 E
I I - 5 - 5 - 3 E
It means Terminal Access Controller Access-Control System Plus. It works like RADIUS does.
Click the External TACACS+ to open the following page:
Available settings are explained as follows:
Item
Enable
Vigor2860 Series User's Guide
address.
Specify the way to authenticate the wireless client.
PAP Only / PAP/CHAP/MS-CHAP/MS-CHAPv2 – Choose PAP
Only. Or choose the one which supports PAP, CHAP, MS-CHAP
and MS-CHAPv2.
Support 802.1X Method – The built in RADIUS server offered
by Vigor router can act as the AAA server. Check the box to
enable the function of authentication mechanism.
During the process of security authentication, user account
and user password will be required for identity
authentication. Before configuring such page, create at least
one user profile in User Management>>User Profile first.
Select All – Click it to select all of the user profiles in
Available List.
Clear All- Click to remove all of the user profiles in Available
List.
Available List – The user profiles without RADIUS server
enabled in User Management >> User Profile will be listed
in this field.
Authentication List –The user profiles with RADIUS server
enabled in User Management >> User Profile will be listed
in this field.
Users can be authenticated by RADIUS server and local
802.1X to get certain network service. It is not necessary to
create new user profiles (containing user accounts and user
passwords) for RADIUS and local 802.1X respectively.
Simply check this box; all of the user profiles (prepared for
RADIUS server authentication) listed in Authentication List
will be synchronized for local 802.1X user authentication.
x t e r n a l T A C A C S +
x t e r n a l T A C A C S +
Description
Check to enable TACACS+ feature.
201