Draytek VIGOR2860 series User Manual page 592

Force Overload
Disassociation
After finishing all the settings here, please click OK to save the configuration.
V I I - 5 - 1 3
V I I - 5 - 1 3
Click the Client tab to list the AP management functions that the Access Points support under
different firmware versions.
Click the Server tab to list the AP management functions that Vigor router supports under
different firmware versions.
576
By Traffic – The operation of load balance will executed
according to the traffic configuration in this page.
Upload Limit –Use the drop down list to specify the traffic
limit for uploading.
Download Limit – Use the drop down list to specify the traffic
limit for downloading.
By Idle Time - When the access point is overload (e.g.,
reaching the limit of station number or limit of network
traffic), it will terminate the network connection of the
client's station which is idle for a longest time.
By signal Strength - When the access point is overload (e.g.,
reaching the limit of station number or limit of network
traffic), it will terminate the network connection of the
client's station with the weakest signal.
F u n c t i o n S u p p o r
F u n c t i o n S u p p o
t L i s t
r t L i s t
Vigor2860 Series User's Guide