Draytek VIGOR2860 series User Manual page 501

V I I - 1 - 1 4
V I I - 1 - 1 4
This function is used to upgrade modem code if you find built-in modem code is not suitable for
Vigor router. Contact with your dealer for further assistance if required.
V I I - 1 - 1 5
V I I - 1 - 1 5
There are three ways to activate WCF on vigor router, using Service Activation Wizard, by
means of CSM>>Web Content Filter Profile or via System Maintenance>>Activation.
After you have finished the setting profiles for WCF (refer to Web Content Filter Profile), it is
the time to activate the mechanism for your computer.
Click System Maintenance>>Activation to open the following page for accessing
http://myvigor.draytek.com.
Available settings are explained as follows:
Item
Activate via Interface
Activate
Authentication Message
Vigor2860 Series User's Guide
M o d e m C o d e U p
M o d e m C o d e U p
A c t i v a t i o n
A c t i v a t i o n
Description
Choose WAN interface used by such device for activating
Web Content Filter.
The Activate link brings you accessing into
www.vigorpro.com to finish the activation of the account
and the router.
As for authentication information of web filter, the process
of authenticating will be displayed on this field for your
g r a d e
g r a d e
485