Draytek VIGOR2860 series User Manual page 559

Action
Schedule
Now
H o w t o a
H o w t o
Follow the steps below to create a new maintenance profile.
1. Click any index number link, e.g., Index 1.
2. The Maintenance dialog appears.
Info
Available parameters are listed as follows:
Item
Profile Name
Enable
Only Run Once
Device Name
Router Name/
Router Model
Action Type
Vigor2860 Series User's Guide
profile will apply to.
Display the action that managed CPE shall accept.
Display the schedule profiles selected for such profile.
The action will be performed for the selected CPE
immediately.
d d a n e w M a i n t e n a n
a d d a n e w M a i n t e n a n
When restoring configuration to a CPE, make sure the configuration
file you selected was backup from this CPE before. Because restoring
from another device's configuration file may cause serious problem
(e.g., Both devices have different ISP username/ password. Restoring
configuration from one CPE to the other will cause Internet
connection not being online).
Description
Type the name of the maintenance profile.
Check it to enable such profile.
Check it to activate such profile running for once.
The drop down list will display all the CPE devices detected by
Vigor2860 series. Choose the one which will be applied with
such new created profile.
It displays the name and model of Vigor router.
There are three actions for you to choose for such profile.
c e P r o f i l e
c e P r o f i l e
543