Draytek VIGOR2860 series User Manual page 588

BSSID
Security
Signal (%)
Beacon Period
Last Detected
All the APs detected by Vigor router will be treated as unknown APs. You have to specify
which AP is friendly and which one is Rogue respectively. Follow the steps below to perform
the classification of access points.
1. Click the radio button on one of the access points. In this case, DrayTek-LAN-A is
selected.
2. Later, some options will appear on the bottom of the page.
Available settings are explained as follows:
Item
AP's MAC Address
AP's SSID
Add to
Delete From
572
Display the MAC address of the detected access point.
Display the encryption mode used by the access point.
Display the signal strength (represented by percentage) sent
by the access point.
Display the period (time) of the beacon. The beacon signal will
be sent out periodically.
Display the date and time that such access point was detected
by Vigor router.
Description
The MAC address of the selected AP will be displayed here
automatically.
The SSID of the selected AP will be displayed here
automatically.
Friendly APs - If the selected AP shall be treated as Friendly
AP, simply click Add to change its classification from unknown
to Friendly.
Rogue APs - If the selected AP shall be treated as rogue AP,
simply click Add to change its classification from unknown to
Rogue.
Rogue APs - If you want to change the classification of the
rogue AP, simply choose the one and click Delete. Later, the
page will refresh and the one will be classified as Unknown.
Friendly APs - If you want to change the classification of the
Vigor2860 Series User's Guide