Draytek VIGOR2860 series User Manual page 870

add [MAC] [ssid1 ssid2 ssid3
ssid4] [isolate]
del [MAC]
mode [ssid1 ssid2 ssid3
ssid4] [white/black]
wl acl show
wl acl showmode
wl acl clean
E x a m p l
E x a m p
> > wl acl showmode
ssid1: none
ssid2: none
ssid3: none
ssid4: none
> wl acl add 00-50-70-ff-12-70
Set Done !!
> wl acl add 00-50-70-ff-12-70 ssid1 ssid2 isolate
Set Done !!
> wl acl show
----------Enable Mac Address Filter---------
ssid1: dis
----------MAC Address Filter----------
Index
0
1
s: Isolate the station from LAN
>
T e l n e t C o m m
T e l n e t C o m m
This command allows users to configure general settings and security settings for wireless
connection.
S y n t a x
S y n t a x
wl config mode [value]
wl config mode show
wl config channel [number]
wl config preamble [enable]
wl config txburst [enable]
wl config ssid [ssid_num enable ssid_name [hidden_ssid]]
wl config security [SSID_NUMBER] [mode]
wl config ratectl [ssid_num enable upload download ]
854
It means to associate a MAC address to certain SSID interfaces'
access control settings. The isolate setting will limit the wireless
client's network capabilities to accessing the wireless LAN only.
[MAC] format: xx-xx-xx-xx-xx-xx
It means to delete a MAC address entry defined in the access
control list.
It means to set white/black list for each SSID.
It means to show access control status.
It means to show the mode for each SSID.
It means to clean all access control setting.
e
l e
ssid2: dis
Attribute
00:50:70:ff:12:70
s 00:50:70:ff:12:70
a n d : w l c o n f i g
a n d : w l c o n f i g
or xx:xx:xx:xx:xx:xx
or xx.xx.xx.xx.xx.xx
ssid3: dis ssid4: dis
MAC Address Associated SSIDs
ssid1 ssid2 ssid3 ssid4
ssid1 ssid2
Vigor2860 Series User's Guide