Draytek VIGOR2860 series User Manual page 92

Active When
After finished the above settings, click OK to save the settings.
I I - 1 - 1 - 3 W
I I - 1 - 1 - 3 W
To use 3G/4G network connection through 3G/4G USB Modem, please configure WAN3 or
WAN4 interface.
Available settings are explained as follows:
Item
Enable
Display Name
76
If you choose Failover as the Active Mode, Active When
will appear. Please specify which WAN will be the Backup
interface.
Any of the selected WAN disconnect – Such backup WAN
will be activated when any master WAN interface
disconnects.
All of the selected WAN disconnect – Such backup WAN will
be activated only when all master WAN interfaces
disconnect.
Check boxes for WAN1 to WAN4 – Specify the WAN
interface by checking the WAN box.
A N 3 / W A N 4 ( U S B )
A N 3 / W A N 4 ( U S B )
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
WAN reaches the traffic threshold (specified here),
the failover WAN will be enabled automatically to
share the overloaded data traffic.
Vigor2860 Series User's Guide