Enabling Or Disabling File Auto Install; Installing Upgrades - Honeywell dolphin 75e User Manual

Enabling or Disabling File Auto Install

AutoInstall is enabled by default. When AutoInstall is enabled, during the power up boot or reboot process, the following folders
are searched for zip files containing applications.
• \Internal storage\honeywell\autoinstall on the terminal
• \IPSM card\honeywell\autotinstall on the terminal
• \honeywell\autoinstall on a microSD card if installed in the terminal
Each zip file found is then compared to the applications already installed on the Dolphin terminal and:
• If the application is not installed, AutoInstall installs the application.
• If the application is already installed, AutoInstall checks to see if the zip file contains a newer version of the application,
and then installs the newer version.
• If the application is already installed and there is not a newer version, AutoInstall ignores the installation file.
When AutoInstall is not enabled, the contents of the honeywell\autoinstall folders on the terminal and on the SD card (optional)
are ignored.
To disable AutoInstall:
1. Touch All Apps > AutoInstall Settings
2. Remove the check from the Enable AutoInstall box to disable the option.

Installing Upgrades

Upgrades for the Power Tools and other system software on the Dolphin terminal come in the form of zip files and are
available from Customer Support
Important: The terminal must have power for the length of the entire upgrade process or it could become unstable. Do not
attempt to remove the battery during the process.
To install a software upgrade:
1. Copy the upgrade file (*.zip) into one of the following folders:
• Internal storage\honeywell\autoinstall on the terminal
Software updates saved to this folder, do not persist when a Factory Reset (Clean Boot) is performed.
• IPSM card\honeywell\autoinstall on the terminal
Software updates saved to this folder, persist when a Factory Reset (Clean Boot) is performed.
• \honeywell\autoinstall on an SD card (if installed)
Software updates saved to this folder, do not persist when a Factory Reset (Clean Boot) is performed.
2. Touch All Apps
3. Select Packages update from the AutoInstall Settings
installs the software upgrade.
You can also initiate a software upgrade using the terminal buttons instead of the package update option.
1. Press and hold the Power button
2. Select Reboot.
3. When the Honeywell splash screen appears, simultaneously press and hold the Power button
Volume Down
4. Verify
Volume button to move through the options until "Recovery Mode" appears.
.
or www.honeywellaidc.com.
> AutoInstall Settings
until the options menu appears.
buttons until the Recovery screen appears.
appears at the top of the screen. If "Recovery Mode" does not appear, press the Up or Down
. Verify Autoinstall is enabled.
screen. The terminal automatically initiates a reboot and
and
1 - 15