Using The Scan Demo To Decode A Bar Code - Honeywell dolphin 75e User Manual

Using the Scan Demo to Decode a Bar Code

The Scan Demo demonstrates the functionality of the integrated scan image engine in the terminal and is not intended as a
functional business solution. Detailed information on how to create custom applications for your Dolphin terminal is
provided in the Software Development Kit (SDK), available for download at www.honeywellaidc.com.
1. Touch All Apps > Demos
2. Point the Dolphin terminal at the bar code. For optimum performance, avoid
reflections by scanning the bar code at a slight angle.
3. Touch and hold Scan on the screen or press and hold one of the Scan buttons.
Center the aiming beam over the bar code; see
The bar code is decoded and the results appear on the screen.
Decode Results
Touch the dots or swipe left or
right to scroll through the
decode results of past scans.
Automatic Scanning
Enable Automatic scanning mode to activate the imager for continuous scanning without requiring the operator to
touch Scan for each bar code presented in the field of view of the imager. To configure the time interval between scan
attempts, see Auto Scan Delay under
1. Slide the Automatic blue button to the ON position to enable the feature.
2. Touch Scan or press the Scan button to activate the imaging engine. Once activated, the imager automatically
scans and decodes bar codes presented in the field of view.
3. Touch Scan or press the Scan button to deactivate the imager.
4. Slide the Automatic blue button to the OFF position to disable the feature.
> Scan Demo to open the Scan Demo application.
Aiming Beam on page
Configuring the Scan Demo Application
3-9.
Scan Statistics
See Configuring the Scan Demo
Application on page 3-8.
(page 3-8).
3 - 7