Understanding And Changing The Battery Charge Status Led Indicator; Important Charging Guidelines - Honeywell dolphin 75e User Manual

Understanding and Changing the Battery Charge Status LED Indicator

You can select the type of feedback provided by the Battery Charge Status LED on the terminal. The factory default setting
is HSM Battery LED.
1. Touch All Apps
2. Select one of the following options:
Default Battery LED
Terminal Connected Charger
No
No
Yes
Yes
Yes
HSM Battery LED (Factory Default Setting)
Terminal Connected to Charger
No
No
Yes
Yes
Yes
Either
No Battery LED
When selected, the LED does not provide charge status feedback.

Important Charging Guidelines

Source Current Specifications
Battery charging times can be significantly lengthened or charging may not occur if the terminal is drawing more
currant than is supplied by the charging peripheral (e.g., HomeBase, eBase, Mobile Base, or ChargeBase), USB wall
charger, or USB Host (e.g., workstation PC).
• The maximum current supplied through a charging peripheral is 2.0A.
• The maximum current supplied by the USB wall charger is 900mA.
• The maximum current supplied by a USB Host can vary from 100mA to 500mA. Do not attempt to charge the terminal
from a 100mA source. An active Dolphin terminal uses more current than supplied by a 100mA source causing the
terminal to continue to draw power from the battery.
Note: Placing the terminal in Sleep Mode (Suspend mode) while charging reduces the current draw of the terminal and
shortens the charging time of the battery.
To verify the battery is charging, touch All Apps
Charging a Severely Low or Completely Discharged Battery
The terminal powers off if the battery charge goes below 1%. Connect the terminal to an AC power source for
charging. When you first connect the terminal to power for charging, the battery status LED on the terminal flashes red.
As the battery charge reaches approximately 2%, the battery status LED changes to a steady amber and a battery
2 - 10
> Settings > Battery LED.
LED Illumination
Blinking Red
Off
Steady Red
Steady Amber
Steady Green
LED Illumination
Blinking Amber
Off
Steady Amber
Blinking Green
Steady Green
Blinking Red
Battery Charge Level
Battery level is below 15%
Battery level is more than 15% (including 15%)
Battery level is below 15%
Battery level is between 15% and 90%
Battery level is above 90% (including 90%)
Battery Charge Level
Battery level below 20%
Battery level is more than 20%
Battery level is between 0% and 60%
Battery level is between 60% and 95%
Battery level is above 95%
Battery error
> Settings > Battery Monitor.