Checking The Battery Health; Managing Battery Power - Honeywell dolphin 75e User Manual

charging icon briefly appears on the touch panel screen. Once the battery reaches a safe charge threshold, the
terminal boots when the Power button is pressed. The length of time before the battery reaches a safe charge
threshold varies depending on the extent of the battery discharge.
Note: If you are charging the terminal from a USB host device (PC) using the USB Charge/Communication Cable, the
length of time before the battery reaches a safe charge threshold varies depending on the extent of the initial
battery discharge level and the current supplied by the USB charging source. Inadequate source current may
interfere with effective battery charging.

Checking the Battery Health

Battery health is different than the amount of charge on left on the battery. To see the percentage of recharging life left on
the battery (State of Health):
1. Touch All Apps > Settings
2. Touch Battery Information.

Managing Battery Power

Letting the battery become fully discharged causes the terminal to lose all data in RAM. Honeywell recommends, you keep
a charged battery in the terminal at all times to help prevent data loss. Removing the battery from the terminal erases all
non-persistent memory.
When the terminal is running on battery power (as opposed to external power), warnings are displayed when the battery
reaches critical and low battery points.
Checking Battery Power and Monitoring Battery Power Use
Touch All Apps > Settings
• Percentage of battery charge remaining
• Amount of time left on the battery charge
• Battery Information (e.g., Serial Number, Temperature, Voltage, Charging Cycles, and State of Health)
Touch All Apps > Settings
• Battery status (charging or not charging)
• Percentage of battery charge remaining
• Amount of time left on the battery charge
• How the battery was used (statistics of running apps and services) since the last full charge
Battery level and
Battery status.
Touch to view History
details.
> Battery Monitor.
> Battery Monitor (under Honeywell Settings) to view the:
> Battery (under Device) to view the:
Touch to access Battery saver and
Battery optimization information.
Touch an item to view usage
details and adjust power use.
2 - 11