Honeywell dolphin 75e User Manual page 81

To Write a message on an NFC tag:
1. Touch NFC Tag Demo
2. Touch Write a message
3. Input the message, and then select Write.
4. Hold the writable or rewritable NFC tag close to the back of the terminal. A "Write successful" popup message dis-
plays on the screen.
NFC Bluetooth Demo
NFC Bluetooth demo demonstrates how NFC in conjunction with Bluetooth technology can facilitate the transfer of a
file between two devices.
Note: The NFC Bluetooth Demo is for use with Dolphin 75e terminals only.
1. Verify NFC technology is enabled on both terminals.
2. Verify Android beam is enabled on the terminal sending the file.
3. Touch NFC Bluetooth
demo automatically enables Bluetooth technology on both terminals during the demo process.
4. Touch Select.
5. Choose to browse for the file. A Google account is required for Google Drive™ Online storage service.
Additional fees may apply.
6. Touch the file name or picture thumbnail to send. Once a file is selected, the NFC Bluetooth app screen displays an
brief pop-up message to "Ensure devices are near for beaming." You do not need to touch "Select" again if the pic-
ture or file appears on the screen.
7. Hold the terminals back to back. The sending terminal emits a sound, the screen image shrinks, and the message,
"Touch to beam" displays. Both terminals must be unlocked to for NFC detection. If sound is muted, the terminal
vibrates when an NFC tag is detected.
8. Touch the reduced screen image. The terminal automatically initiates a Bluetooth pairing. Once pairing is complete,
the file is sent.
The file image and saved location are displayed on the receiving terminal screen when the transfer is successful.
By default, the file is saved to the Internal storage/honeywell/nfcbtdemo folder.
9. Select the Back button
ogy when the demo is closed.
NFC Beam Demo
NFC Beam Demo demonstrates how a file can be transmitted between two devices using the Android beam.
Note: The NFC Bluetooth Demo is for use with Dolphin 75e terminals only.
1. Verify NFC technology is enabled on both terminals.
2. Verify Android beam is enabled on the terminal sending the file.
3. Touch NFC Beam Demo
4. Check the box next to the test.txt file.
5. Hold the terminals back to back. The sending terminal emits a sound, the demo screen image shrinks, and the mes-
sage, "Touch to beam" displays.
Note: Both terminals must be unlocked for NFC detection. If sound is muted, the terminal vibrates when an NFC tag is
detected.
from inside the NFC Demos
.
from inside the NFC Demos
to exit the demo. The NFC Bluetooth demo automatically disables Bluetooth technol-
from inside the NFC Demos
app.
app on the sending terminal. The NFC Bluetooth
app on the sending terminal.
7 - 5