3. To adjust the angle of the bracket arm, twist the thumb screws counterclockwise to loosen the locks. Reposition the
angle of the arm, and then twist the knobs clockwise to lock the arm into position.
4. Insert the power cable connector into the power jack on the Mobile Base.
5. Twist the cable connector 90° clockwise to engage the cable lock.
6. Plug the power adapter into the vehicle power outlet (e.g., cigarette lighter outlet)
Charging the Main Battery
The mobile base provides power to the Dolphin and allows charging of the main batteries in the terminal. The main battery
charges in 4 hours for the standard battery or 6 hours for the extended battery. The intelligent battery charging system
incorporated into all Dolphin terminals prevents overcharging, which means that terminal may be seated in the base indefinitely
without damage to the terminal, battery pack, or the base.
For more information about Honeywell battery packs and how to check battery power levels in your terminal, refer to
(page 2-8).
10 - 4
Thumb screws for arm angle
adjustments.
4
5
Battery