5. Touch the check mark
Aiming Beam
The terminal projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction
for a good read. The aiming beam is smaller when the scanner is closer to the code and larger when it is farther from the
code. Hold the scanner close to smaller bar codes, and farther away from large bar codes to get a proper read. If the bar
code is highly reflective (e.g., laminated), you may need to tilt the scanner at an angle so the bar code can be scanned.
Linear Bar Code.
2D Matrix Symbol
to save the JPG image to the Internal storage\honeywell\scandemo folder.
3 - 9