Selecting Audio Input Modes - Yamaha RX-V4600 Owner's Manual

PLAYBACK

Selecting audio input modes

This unit comes with a variety of input jacks. You can
select the type of input signal you want to use as follows.
Press AUDIO SELECT to select an input mode.
In most cases, use AUTO.
AUDIO
SELECT
or
Front panel
V–AUX DVR/VCR2 VCR 1 CBL/SAT
SP
A
A . S E L : A U T O
Automatically selects input signals in
AUTO
the following order:
1) i.LINK
2) HDMI
3) Digital signals
4) Analog signals
Selects only i.LINK signals.
i.LINK
If no i.LINK signals are input, no
sound is output.
Selects only HDMI signals.
HDMI
If no HDMI signals are input, no sound
is output.
COAX/OPT Selects digital signals input at the
OPTICAL or COAXIAL jacks.
Use if i.LINK or HDMI signals are also
being input.
Selects only analog signals.
ANALOG
If no analog signals are input, no sound
is output.
* If this unit detects a Dolby Digital or DTS signal,
the decoder automatically switches to the appropriate
sound field program.
y
• You can adjust the default input mode this unit selects when the
power is turned on (see page 57).
• DTS mode is recommended for playback of a CD or LD
encoded in DTS.
Note
If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding even if you
make a digital connection between this unit and the player.
40
SYSTEM
POWER POWER STANDBY POWER
TV AV
A B AUDIO SELECT SLEEP
PHONO TUNER CD MULTI CH IN
Remote control
DTV DVD MD/TAPE CD–R CD TUNER PHONO
VOLUME
L L
Input mode
*
■ Displaying information about the input
source
You can display the type, format and sampling frequency
of the current input signal.
1
Set AMP/SOURCE/TV to AMP, then press
TOP on the remote control.
The top display appears.
AMP
SOURCE
TV
Stereo/Surround
Input Select
dB
R
Manual Setup
Auto Setup
System Memory
2
Press n repeatedly to select Audio Info.
The following information appears in the display.
Auto Setup
System Memory
Audio Info.
Format
Sampling
Channel
Bitrate
Dialogue
Flag1/Flag2 Flag data encoded with DTS or Dolby
3
Press EXIT.
TOP
TITLE
Sound
Basic
Option
Format Analog
Sampling ---
Channel 2/0/---
Bitrate ---
Dialogue ---
Flag1 ---
Flag2 ---
Signal format display. When the unit
cannot detect a digital signal it
automatically switches to analog input.
Sampling frequency. When the unit is
unable to detect the sampling
frequency "?" appears.
Number of source channels in the input
signal. For example, a multi-channel
soundtrack with 3 front channels,
2 surround channels and LFE, is
displayed as "3/2/0.1".
Bit rate. When the unit is unable to
detect the bit rate "– – –" appears.
Dialogue normalization information
for Dolby Digital signals.
Digital signals that cue this unit to
automatically switch decoders.