Installing Batteries In The Remote Controls - Yamaha RX-V4600 Owner's Manual

GETTING STARTED

Installing batteries in the remote controls

Notes on batteries
• Change all of the batteries if you notice conditions such as the operation range of the remote control decreases, the indicator does not
flash, or its light or display window become dim.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these
different types of batteries may have the same shape and color.
• We strongly recommend using alkaline batteries.
• If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
• Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.
■ Remote control
1
Press the part and slide the battery
compartment cover off.
2
Insert four supplied batteries (AAA, LR03)
according to the polarity markings on the
inside of the battery compartment.
3
Slide the cover back until it snaps into place.
If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new
batteries, set up the remote control code and program
any acquired functions that may have been cleared.
4
2
1
3
■ Zone 2/Zone 3 remote control
1
1
Press the part and slide the battery
compartment cover off.
2
Insert two supplied batteries (AAA, R03)
according to the polarity markings (+ and –)
on the inside of the battery compartment.
3
Slide the cover back until it snaps into place.
2
3