Selecting Audio Input Jacks (Audio Select); Selecting The Multi-Channel Input Component; Using Your Headphones - Yamaha RX-V1900 Owner's Manual

Playback
Selecting audio input jacks
(AUDIO SELECT)
Use this feature (audio input jack select) to switch the
input jack assigned to an input source when more than one
jacks are assigned to an input source.
Rotate the C INPUT selector (or press one
1
of the input selector buttons (3)) to select
the desired input source.
Press D AUDIO SELECT (or set the
2
operation mode to E AMP and then press
N AUDIO SEL) repeatedly to select the
desired audio input jack select setting.
Available input sources
USB DOCK V-AUX VCR DVR CBL/SAT
A . S E L :
AUTO
Automatically selects input signals in the
following order:
(1) HDMI
(2) Digital signals
(3) Analog signals
HDMI
Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
COAX/OPT
Automatically selects input signals in the
following order:
(1) Digital signals input at the COAXIAL jack.
(2) Digital signals input at the OPTICAL jack.
When no signals are input, no sound is output.
ANALOG
Selects only analog signals. If no analog
signals are input, no sound is output.
y
You can configure the default audio input jack select setting
with "AUDIO SELECT" (page 77).
Note
This feature is not available if no digital input jack is assigned
to the selected input source in "I/O ASSIGNMENT" (page 75).
"HDMI" is available only when an HDMI input jack is
assigned.
36
En
DVD BD/HD DVD MD/CD-R TV CD PHONO MULTI CH TUNER
A U T O
Selected audio input jack
select setting
Selecting the multi-channel input
component
Use this feature to select the component connected to the
MULTI CH INPUT jacks (page 23) as the input source.
Rotate the C INPUT selector on the front panel
to select "MULTI CH" (or press 3 MULTI).
y
You can configure the multi channel input settings with
"MULTI CH" (page 74).
Note
Sound field programs cannot be selected when "MULTI CH" is
selected as the input source.

Using your headphones

Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
AUDIO TONE
SELECT CONTROL ENTER PRESET/TUNING
INPUT
STRAIGHT
MAIN ZONE
EFFECT
YPAO SILENT CINEMA
ON/OFF
PROGRAM OPTIMIZER
MIC PHONES
ON
OFF
MASTER
y
When you select a sound field program, SILENT CINEMA
mode activates automatically (page 44).
Notes
• When you connect headphones, no signals are output at the
speaker terminals.
• All digital multi-channel audio signals are mixed down to the
left and right headphone channels.
• When "MULTI CH" is selected as the input source, only the
signals input at the MULTI CH INPUT FRONT jacks are
output.
PURE DIRECT
VOLUME
SEARCH STEREO/
MEMORY MODE MONO BAND INFO
ZONE ON/OFF ZONE CONTROLS
MULTI ZONE
ZONE 2 ZONE 3
S VIDEO VIDEO L AUDIO R OPTICAL
VIDEO AUX USB