Manual Setup (Basic) - Yamaha RX-V4600 Owner's Manual

SYSTEM OPTIONS
PR/SB Select (Presence/surround back speaker
selection)
Surround back and presence speakers do not output sound
simultaneously. You can select to prioritize either speaker
set when playing sources that contain surround back
channel signals using CINEMA DSP sound field
programs.
Choices: Presence, Surround Back
Muting Type
Audio Delay
PR/SB Select
• Select "Presence" to use presence speakers even when
surround back channel signals are input. The signals
for the surround back channel will be output from
surround speakers.
• Select "Surround Back" to use surround back speakers
when a surround back channel signal is detected in a
CINEMA DSP program. Presence channel signals will
be output from front speakers.
62
Presence
Surround Back

Manual Setup (Basic)

Use this menu to set up basic system parameters.
1
Set AMP/SOURCE/TV to AMP, then press
TOP on the remote control.
AMP
SOURCE
TV
2
Select Manual Setup, then press h.
3
Select Basic, then press h.
Sound
Basic
Option
4
Select the desired parameters, then press h
to access and adjust.
y
• Most of the parameters described in the basic menu are set
automatically when you run auto setup. You can use the basic
menu to make further adjustments, but we recommend running
auto setup first.
• You can reset these parameters by performing the auto setup
procedure (see page 27).
TOP
TITLE
Test Tone
Speaker Set
Speaker Distance
Speaker Level