Setting Remote Control Codes - Yamaha RX-V4600 Owner's Manual

Hide thumbs Also See for RX-V4600:

Table of Contents

Available languages

REMOTE CONTROL FEATURES

■ Controlling optional components

OPTN is an additional component control area that can be

programmed with remote control functions independently

from any input source. This area is useful for

programming commands that are to be used only as a part

of a macro function or for components that do not have a

valid remote control code.

To select the OPTN control area, press n repeatedly until

OPTN appears in the display window.

• You cannot set a remote control code for this area. See page 74

to program buttons operated within this component control

• The OPTN area cannot be used when "2001" or "2003" is

selected in the amplifier library (see page 73).

Setting remote control codes

You can control other components by setting the

appropriate remote control codes. Codes can be set up for

each input area. For a complete list of available remote

control codes, refer to "LIST OF REMOTE CONTROL

CODES" at the end of this manual.

The following table shows the default component

(Library: component category) and the remote control

code for each input area.

Remote Control Code Default Settings

You may not be able to operate your YAMAHA component even

if a YAMAHA remote control code is preset as listed above.

In this case, try setting another YAMAHA remote control code.

Set AMP/SOURCE/TV to SOURCE.

Press an input selector button to select the

source component you want to set up.

AUDIO SELECT

Default YAMAHA

Table of Contents