Front Terminals; Bi-Wired Connection; Subwoofer Jack - Yamaha RX-V4600 Owner's Manual

■ FRONT terminals

Connect one or two speaker systems to these terminals.
If you use only one speaker system, connect it to either of
the FRONT A or B terminals.
Note
The Canada model cannot output to two separate speaker systems
simultaneously.

Bi-wired connection

The unit also allows you to make bi-wired connections to
one speaker system. Use two pairs of speaker cables for
each speaker (one pair for the woofer and one pair for the
tweeter/mid-range). To use the bi-wired connections, press
SPEAKERS A and SPEAKERS B on the front panel so
that both SP A and B light up on the front panel display.
Bi-wired connection
+
R
FRONT
+
This unit
■ CENTER terminals
Connect a center speaker to these terminals.
■ SURROUND terminals
Connect surround speakers to these terminals.

■ SUBWOOFER jack

Connect a subwoofer with a built-in amplifier, such as the
YAMAHA Active Servo Processing Subwoofer System,
to this jack.
■ SURROUND BACK terminals
Connect surround back speakers to these terminals.
If you only connect one surround back speaker, connect it
to the left (L) terminals.
■ PRESENCE terminals
Connect presence speakers to these terminals.
Note
You can also use these terminals to connect Zone 2 speakers
(see page 84).
– – +
A
L
– – +
B
SPEAKER SETUP
17