Basic Hdmi Operations; Changing Hdmi Parameters - Yamaha RX-V4600 Owner's Manual

USING HDMI

Basic HDMI operations

■ Assigning HDMI components
Assigning an HDMI component to a specific input allows
you to select the video input signals from that component
together with the audio signals received via the HDMI
connection for simultaneous playback.
Note
If you want to change the input assignment of a registered HDMI
component, use Input Assign in the GUI menu (see page 99) or
INPUT ASSIGN in the front panel display system options menu
(see page 91).
■ Listening to playback from HDMI
components
Perform the following steps to listen to playback from a
registered HDMI component.
If the HDMI component has been assigned to a
specific input
1
Rotate the INPUT selector to select the input
assigned to the HDMI component.
2
Press AUDIO SELECT repeatedly to set
"AUTO" or "HDMI" as the input mode.
V-AUX DVR/VCR2 VCR 1 CBL/SAT
SP
A
A.SEL:AUTO
V-AUX DVR/VCR2 VCR 1 CBL/SAT
SP
A
A.SEL:HDMI
3
Start playback on the connected HDMI
component.
98
DTV DVD MD/TAPE CD-R CD TUNER PHONO
VOLUME
L
or
DTV DVD MD/TAPE CD-R CD TUNER PHONO
VOLUME
L

Changing HDMI parameters

You can change HDMI parameters in the GUI or the front
panel display menu.
Display
HDMI
i.LINK Select
Stereo/Surround
y
Input Assign and Support Audio are also available in the front
panel display system options menu (see page 91). However,
Select and Information are only available in the GUI menu.
■ Select (Select)
Use this feature to select the HDMI component assigned
to either the HDMI IN 1 or HDMI IN 2 jack of this unit.
HDMI > Select >
Choices: IN 1, IN 2
Select IN 1 or IN 2 to choose the HDMI component
assigned to either HDMI input jack.
Display
Select
Input Assign
dB
Support Audio
R
Note
When the HDMI component connected to the selected HDMI IN
dB
R
jack is not transmitting audio signals (e.g. Super Audio CD or
DVI) and AUDIO SELECT is set to AUTO, audio signals input
at the analog or other digital input jacks will be selected to play
back. It may take a few seconds before this unit outputs sound.
Speaker B
Select
Input Assign
Support Audio
Speaker B
IN 1
IN 2
Zone 3 Volume