Front Panel Display Menus; Advanced Setup Menu - Yamaha RX-V4600 Owner's Manual

This unit has additional menus that are displayed in the
front panel display.

Advanced setup menu

This menu offers additional operations to adjust and
customize the way this unit operates. Change the initial
settings (indicated in bold under each parameter) to reflect
the needs of your listening environment.
1
Make sure this unit is in the standby mode.
2
On the front panel, while holding down
STRAIGHT/EFFECT, press STANDBY/ON.
STRAIGHT
EFFECT
3
Rotate PROGRAM to select the desired menu
item.
The name of the selected item appears in the front
panel display.
PROGRAM
4
Press STRAIGHT/EFFECT to change the
setting.
5
Press STANDBY/ON to save the new setting.
This unit enters the standby mode.
y
The new setting is activated next time you turn on the power of
this unit.
Note
The remote controls and VOLUME control on the front panel of
this unit are ineffective while you are using the advanced setup
menu.
■ SP IMP. (Speaker impedance)
Use to set the impedance of this unit so that it matches that
of your speakers.
Choices: 6ΩMIN, 8ΩMIN
• Select "6ΩMIN" for speakers 6 ohms or higher.
• Select "8ΩMIN" for speakers 8 ohms or higher.

FRONT PANEL DISPLAY MENUS

STANDBY
/ON
■ PRESET (User preset)
Use to reset all of this unit's parameters to the initial
factory settings with the exception of System Memory and
Auto Setup settings.
Choices: CANCEL, RESET
• Select "CANCEL" if you do not want to reset this
unit's parameters.
• Select "RESET" to reset this unit's parameters.
Note
This setting does not affect advanced setup menu item
parameters.
■ REMOTE AMP (Remote control AMP ID)
Use to set this unit's ID for remote control recognition
(see page 73).
Choices: ID1, ID2
• Select "ID1" when the remote control amplifier library
code is set to "2000" or "2001".
• Select "ID2" when the remote control amplifier library
code is set to "2002" or "2003".
■ REMOTE TUN (Remote control tuner ID)
Use to set this unit's tuner ID for remote control
recognition (see page 73).
Choices: ID1, ID2
• Select "ID1" when the remote control tuner library
code is set to "2602".
• Select "ID2" when the remote control tuner library
code is set to "2603".
■ FAN MODE (Fan operation mode)
Use to set the operation of this unit's cooling fan.
Choices: AUTO, CONT.
• Select "AUTO" to set the fan to operate automatically
according to the temperature of this unit.
• Select "CONT." to set the fan to operate continuously
regardless of the temperature of this unit.
< Asia and General models only >
■ TU (Tuner frequency step)
Use to set the tuner frequency step according to the
frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• Select "AM10/FM100" for North, Central and South
America.
• Select "AM9/FM50" for all other areas.
■ LANG. (GUI language)
Use to set the language that appears in this unit's GUI
(graphical user interface) display.
Choices: ENGLISH, JAPANESE, FRENCH, GERMAN
You can select the language of your choice.
FRONT PANEL DISPLAY MENUS
87