Proceed as follows to search for individual parameters or terms:
1. Ensure that the parameter view is selected.
The parameter is selected if the upper editor bar is dark blue.
2. Enter <Ctrl+F>.
3. Enter a parameter number or a search term in the search field (e.g. control word).
4. Press <Enter> or click on "Search".
If the parameter or term being searched for is found, then this is highlighted in the parameter
list.
5. Press <F3> to jump to the next search result.
4.5.3
Comparing parameters
Overview
Using the comparison function in the parameter view, you can compare the actual value in the
parameter set of a drive object (e.g. infeed) with values from the factory settings or from the
offline/online mode.
Offline mode
In the offline mode, the actual values are compared to the factory settings by default.
Online mode
In the online mode, the actual values are compared to the offline settings by default. In addition,
you can compare the actual values with the factory settings.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Fundamentals
4.5 Using parameter lists
81