Smart Line Module Booksize Compact Format; Motor Module Booksize Compact Format - Siemens SINAMICS S120 Commissioning Manual

6.1.2.7

Smart Line Module booksize compact format

Table 6-13 Meaning of the LEDs on the Smart Line Module booksize compact
State
RDY DC LINK
Off Off
Green –
Orange
Red
Orange Orange
Red –
Green/red –
(0.5 Hz)
Green/red (2 –
Hz)
Green/ –
orange
or
red/orange
6.1.2.8

Motor Module booksize compact format

Table 6-14 Meaning of the LEDs on the Motor Module booksize compact
Status
RDY DC LINK
Off Off
Green –
Orange
Red
Orange Orange
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Description, cause
Electronic power supply is missing or outside permissible tol‐
erance range.
The component is ready for operation and cyclic DRIVE-CLiQ
communication is taking place.
The component is ready for operation and cyclic DRIVE-CLiQ
communication is taking place.
The DC link voltage is present.
The component is ready for operation and cyclic DRIVE-CLiQ
communication is taking place.
The DC link voltage is too high.
DRIVE-CLiQ communication is being established.
At least one fault is present in this component.
Note:
LED is controlled irrespective of the corresponding messages
being reconfigured.
Firmware is being downloaded.
Firmware download is complete. Wait for POWER ON.
Identifying whether the component is activated using the LED
(p0124)
Note:
Both options depend on the LED status when module recog‐
nition is activated via p0124 = 1.
Description, cause
The electronics power supply is missing or outside the permis‐
sible tolerance range.
The component is ready for operation. Cyclic DRIVE-CLiQ com‐
munication is taking place.
The component is ready for operation. Cyclic DRIVE-CLiQ com‐
munication is taking place.
The DC link voltage is present.
The component is ready for operation. Cyclic DRIVE-CLiQ com‐
munication is taking place.
The DC link voltage is outside the permissible tolerance range.
DRIVE-CLiQ communication is being established.
Diagnostics
6.1 Diagnostics using LEDs
Remedy
–
–
–
Check the line voltage
–
Remedy and acknowledge fault
–
Carry out a POWER ON
–
Remedy
–
–
–
Check the line supply voltage.
–
293