Siemens SINAMICS S120 Commissioning Manual page 78

Fundamentals
4.3 BICO interconnections
3. Activate the check boxes for the parameter bits that you want to connect.
4. Confirm with OK.
The connection dialog closes.
Result
The binector or connector output is connected to the selected parameter (bit).
Multiple connections at outputs
Several interconnections can be set simultaneously for a parameter, which for reasons of space
however, cannot be displayed in the interconnections field. Clicking the icon
interconnection field opens a list, which shows all of the active parameter interconnections.
76
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
next to the