Siemens SINAMICS S120 Commissioning Manual page 169

3. Double-click the "Restore factory settings" entry in the secondary navigation.
The dialog box with the current settings is displayed.
4. Click the "Reset" button.
The drive communication settings are reset to the factory settings.
5. Go offline and then establish an online connection again.
The factory settings of the IP address and the device name are displayed at "Online access".
Result
The communication settings show the factory settings again.
Note
After resetting to the factory settings, it makes sense to assign an IP address (see Chapter
"Assigning an IP address (Page 160)") and a PROFINET device name (see Chapter "Assigning
PROFINET device names (Page 162)") to the drive.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
5.4 Establishing an online connection to the drive
Commissioning
167