Changing The Password For The Users "Sinamics" And "Administrator - Siemens SINAMICS S120 Commissioning Manual

Commissioning
5.7 Basic parameterization of the drive objects
Procedure
To delete the password for the "SINAMICS" user, proceed as follows:
1. Click the "Delete password" button.
The "Delete password" dialog opens.
2. Enter the password for the "SINAMICS" user.
The entry is checked. "Password has been deleted" is displayed if you entered the correct
password.
3. Save the project to accept the settings.
Note
The "Administrator" user must have a password. If this user is to remain enabled for the web
server after the old password has been deleted, a new password must be assigned.
5.7.1.7

Changing the password for the users "SINAMICS" and "Administrator"

Overview
You can only use this function for the users "SINAMICS" and "Administrator" in online mode. The
procedure is the same for both users.
Requirements
• There is an online connection between the Startdrive project and the drive unit.
• The respective user is enabled.
186
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2