Binary Inputs - Siemens SIPROTEC 5 Manual

Integrated Power Supply
1/6 plug-in module
assembly without plug-in
modules (modules CB202)
Plug-in module for base
module or plug-in module
assembly (for example,
communication module)
Stored-energy time for auxiliary voltage outage or
short circuit, modular devices
Stored-energy time for auxiliary voltage outage or
short circuit, non-modular devices
11.1.2

Binary Inputs

Rated voltage range
Current consumption, excited
Power consumption, max.
Pickup time
Dropout time 20
Control voltage for all modules
with binary inputs except the
IO233
Control voltage for binary inputs of
the IO233 modules
Maximum permitted voltage
The binary inputs contain interference suppression capacitors. In order to ensure EMC immunity, use the
terminals shown in the terminal diagrams/connection diagrams to connect the binary inputs to the common
potential.
20 For time-critical applications with low-active signals, consider the specified dropout times. If necessary, provide for active discharge of
the binary input (for example, a resistor in parallel to the binary input or using a change-over contact).
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
3.5 W
< 5 W
DC 24 V to 250 V
The binary inputs of SIPROTEC 5 are bipolar with the exception of the
binary inputs on the IO230, the IO231, and the IO233.
Approx. DC 0.6 mA to 1.8 mA (independent of the control voltage)
0.6 VA
Approx. 3 ms
Capacitive load (supply-line capaci-
tance)
< 5 nF
< 10 nF
< 50 nF
< 220 nF
Adapt the binary-input threshold to be set in the device to the control
voltage.
Range 1 for 24 V, 48 V, and 60 V
Control voltage
Range 2 for 110 V and 125 V
Control voltage
Range 3 for 220 V and 250 V
Control voltage
Range
DC 300 V
14 VA
< 6 VA
For V ≥ DC 24 V ≥ 50 ms
For V ≥ DC 110 V ≥ 50 ms
For V ≥ AC 115 V ≥ 50 ms
For V ≥ DC 24 V ≥ 20 ms
For V ≥ DC 60 V/DC 110 V ≥ 50 ms
For V ≥ AC 115 V ≥ 200 ms
Dropout time
< 4 ms
< 6 ms
< 10 ms
< 35 ms
V ≤ DC 10 V
low
V ≥ DC 19 V
high
V ≤ DC 44 V
low
V ≥ DC 88 V
high
V ≤ DC 88 V
low
V ≥ DC 176 V
high
V ≤ DC 85 V
low
V ≥ DC 105 V
high
Technical Data
11.1 General Device Data
7 VA
< 6 VA
429