Settings; Information List - Siemens SIPROTEC 5 Manual
Fault recorder, v7.50 and higher
Hide thumbs
Also See for SIPROTEC 5:
- Manual (272 pages) ,
- Operation manual (218 pages) ,
- Technical data manual (129 pages)
Table of Contents
Advertisement
Fault Recorder
7.2 Function-Group Type Recorder
NOTE
i
i
If fault records are recorded with a slow-scan recorder over a long averaging time, brief trigger events are
detected, but not visible in the fault record.
NOTE
i
i
The complex types (CMV) can be routed in the slow-scan recorder.
The angles are not determined but rather used at the end of the averaging time with the current value.
Parameter: Retrigger Blocking Time
•
Default setting (_:10081:166) Retrigger blocking time = 1 minute
With the Retrigger blocking time parameter, a fault-record extension is prevented by repetitively
occurring identical trigger events. If another trigger is tripped during a recording, the post-trigger time is
restarted and the recording is extended. To prevent this, a retrigger blocking time can be defined. Identical
triggers, which come during the retrigger blocking time, are ignored and do not lead to an extension.
All other active channels can retrigger the fault recorder and thus extend the recording.
NOTE
i
i
If you set the parameter of the retrigger blocking time longer that the record time, no trigger events are
recorded within this time!
7.2.7.5
Settings
Addr.
General
_:2731:1
Control
_:10081:161
_:10081:102
_:10081:111
_:10081:112
_:10081:113
_:10081:116
_:10081:140
_:10081:166
Information List
7.2.7.6
No.
Binary IO
_:2731:51
246
Parameter
General:Mode
Slow-scan 1:Flash-memory
size
Slow-scan 1:Estimated
record size
Slow-scan 1:Maximum
record time
Slow-scan 1:Pre-trigger
time
Slow-scan 1:Post-trigger
time
Slow-scan 1:Manual record
time
Slow-scan 1:Averaging time
Slow-scan 1:Retrigger
blocking time
Information
General:Mode (controllable)
C
Setting Options
•
off
•
on
•
test
0.200 GB to 14.800 GB
0 KB to 200000 KB
1 min to 90 min
0 s to 90 s
1 min to 90 min
1 min to 90 min
1 cycles to 3000 cycles
0 min to 240 min
Default Setting
on
1.500 GB
48 KB
2 min
5 s
1 min
1 min
1 cycles
1 min
Data Class
Type
(Type)
C
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Advertisement
Table of Contents
