Siemens SIPROTEC 5 Manual page 226

Fault Recorder
7.1 Introduction to DIGSI 5
Interface
IEC 61850
Displaying the Record in DIGSI 5
Follow the instructions to download the records from the device into DIGSI 5.
Open your project in the project tree.
²
Click Process data (1).
²
Click Records (2).
²
If needed, double-click Fast-scan and Slow-scan fault records or Continuous records or Trend records
²
(3).
In the menu bar, click Read records (4).
²
Now, the fault recorder downloads the recordings into DIGSI 5.
You can select the records as desired (5) and download them clicking Download (6).
²
With a double-click, you can open the record in DIGSI 5 (8) (see also
²
[leAnzeige_DIGSI-220813, 1, en_US]
Figure 7-14
(1) Process data
(2) Records
(3) Fast-scan and slow-scan fault records and trend records
(4) Reading the list of records
(5) Selecting recordings
(6) Downloading fault records
(7) Display of the record duration
(8) Double-clicking to open the record
6 FSR: Fast-Scan Recorder
7 SSR: Slow-Scan Recorder
8 CR: Continuous recorder
9 TR: Trend recorder
226
File Format
PQDIF
Procedure for Displaying the Record in DIGSI 5
FSR 6 SSR 7 CR 8
X
Figure 7-15).
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
TR 9
X