Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual page 303

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
MTS - Downloading the Site Controller Configuration
Procedure 8-11 MTS - How to Download the Site Controller Configuration
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
6802800U74-N September 2009
Reconnect to the Site Controller and log in.
Select Send Files.
Select Send Configuration in Download Type window.
Browse to folder containing saved Site Controller configuration file.
Highlight the file so its name appears in File name box. Select Open.
In File Download Properties window click Use next.
Click on Update selected items and enter version label, for example date.
There is no preference on which files to overwrite if you are prompted to make
a choice.
Check + sign item in Use Next column and select OK.
Check files have been sent and configured.
Enter attrib in command prompt and confirm SC config is listed.
Type reset to exit configuration mode and close connection when the Site Controller begins its
reset task.
Perform site location command by typing site_location -reset command.
Enter the command when the command prompt becomes available after the 1st reset
of the Site Controller. You need to be logged in with field access.
Reconnect either E1 or X.21 link and wait about one minute.
Reset the Site Controller again. Check that MTS returns to Wide Area Trunking and no alarms
are active. Type status sc.
You need to be logged in with field access.
If site is configured to support SC2 or SC3, the AuC will now report an error, for example:
Decryption failure received on site (12:1).
Item for site on AuC will be yellow. Return to
Software," on page 8-23.
MTS - Downloading the Site Controller Configuration
Reprovision necessary
Process 8-3, "MTS - Restoring the Site Controller
8-27