Recommended Parts; Recommended Torque - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual

Recommended Parts

Table 4-11
and must be procured locally. All model numbers are Motorola part numbers, unless noted otherwise.
Table 4-11
Part
Cover or blanket
Anchor Kit
Grease
AC Power Cable
minimum size
AC Power Cable
maximum size
DC Power Cable
DC Power Cable
110-240 VAC Connector
-48 VDC Connector

Recommended Torque

Table 4-12
Table 4-12
Item
"N" Coupling Nuts
"SMA" Coupling Nuts
Screws up to M 3.5
Nuts up to M 3.5
6802800U74-N September 2009
lists the recommended parts for installation. These are not included as part of the MTS shipment
Recommended Parts for Installation
Type/Size
10 mm Rawl Bolts (concrete
fixing bolts)
anti-oxidant
1.3 mm
2.1 mm
3.3 mm
more than 3 m)
5.3 mm
more than 3 m)
Motorola P/N 3166502A01
MTS 2:
Motorola P/N 3166501A01
MTS4:
Motorola P/N 3166501A02
lists the recommended torque for RF connectors, screws, nuts, and bolts.
Recommended Torque for RF Connectors, Screws, and Nuts
Torque Nm
0.68 – 1.13
1.0
0.6
1.2 for class 80 steel, 0.9 for class 70
steel, and 0.4 for class 50 steel
Supplier
Locally Procured
Locally Procured
Locally Procured
2
(#16 AWG) Locally Procured
2
(#14 AWG) Locally Procured
2
(12 AWG) (Length: Locally Procured
2
(10 AWG) (Length: Locally Procured
Supplied with MTS
Supplied with MTS
Recommended Parts
Where Used
Protection of cabinet
from dust while drilling
MTS cabinet floor
anchors
Battery terminal
corrosion control
Mains Supply wiring
Mains Supply wiring
DC and Backup Battery
wiring
DC and Backup Battery
wiring
AC Mains Connector
DC Connector Backup
Battery connector
Torque lbfin
6.02 – 10
9
5.31
11 for class 80 steel, 8 for class
70 steel, and 3.5 for class 50 steel
4-67