Site Controller - Front Panel Switches; Site Controller - Front Panel Connectors; Table 8-2 Site Controller - Front Panel Switches; Table 8-3 Site Controller - Front Panel Connectors - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Table 8-1 Site Controller - Front Panel Indicators (LED) (Continued)
LED
LED17
LED18

Site Controller - Front Panel Switches

Table 8-2 Site Controller - Front Panel Switches

Switch Name
Reset

Site Controller - Front Panel Connectors

Table 8-3 Site Controller - Front Panel Connectors

Connector Name
POWER SUPPLY
BR
CAN
E1
Service
6802800U74-N September 2009
LED/Port
Position
Name
Port 8 LED1
Exp.Cab.
Port 8 LED2
Switch Function
The front-panel switch can be used to either generate an interrupt to the processor or
to initiate a Hard Reset.
• Push and hold (<1 second) to generate interrupt.
• Push and hold (>3 seconds) for Hard Reset.
Connector Type
MOLEX (2 Pin)
RJ45
RJ45
RJ45
RJ45
Site Controller - Front Panel Switches
Controlled by
• OFF: Ethernet link not present.
• GREEN: Ethernet link present.
• OFF: Ethernet activity not present.
• YELLOW: Ethernet activity
present.
To/From Comment
PSU 28.5 V DC
BR
Ethernet
BR
CAN Bus connection
Junction Panel Pin connections on the Site
Controller are different from
the ones on the Junction Panel
connector.
Service Terminal Provides service access. See
Table 8-4
information. (Service Cable PN:
3066565B)
Indication
for service cable pinout
8-7