Advertisement
Screens and Basic Operations
3.3
Main Screen Operations
3.3.2
Switching the Image Displayed on the Monitor
Press B in the main menu to change the displayed image. However, display settings
performed here are temporary, and if the power is switched off, or a type switch is
executed, the settings in 1. TYPE − 5. Camera/Image take effect.
The images that can be displayed depend on the settings in 1. TYPE − 4. Capture
Camera.
Example:
Camera setting A
Gray−Thru:
The image currently captured by the camera (if you cover the camera
lens with your hand the display will go dark).
Gray−Mem:
An image that has previously been captured. Inspections are performed
using this memory image (covering the lens does not change the image).
Gray−NG:
A captured image (same as a memory image).
An image that was inspected and produced results that were outside the
range of a certain setting condition (i.e. NG (No Good)).
Refer to 13.4 Judgment Output for details.
Note
When Mem (NG) is selected, if no image has been captured yet,
there will be no image in memory, and nothing will be displayed
when the power is switched on.
3 − 8
OCR Type A230
Advertisement
