Advertisement
OCR Type A230
(2) Inspection using two separate groups, group No.1 (G=1)
Example 3:
If the position adjustment group No. is "0", no adjustment is
performed, and the checker always inspects the same
position.
Note
If you find that the position is not adjusted despite having
defined position adjustment checkers, the cause may be that the
inspection checker still has its group number set to "0".
Consider examples 1 and 2 and set the group number
appropriately.
Position
adjustment 1
and No.2 (G=2):
Position adjustment is carried out independently for each
checker, so the checkers can move on both sides.
Position
adjustment
1
R1
(G=1)
Position
adjustment 1
R1
(G=1)
R1
(G=0)
Position and Rotation Adjustment
6.4 Position Adjustment Groups
Position adjustment 2
R2
(G=2)
Position adjustment 2
R2
(G=2)
Position
adjustment 1
R1
(G=0)
6 − 33
Advertisement
