Advertisement
Smart Matching
9.1
Smart Matching
9.1.2
Checker Settings
Create the matching checker and set the checker conditions.
3
21. Template
Register the template image that will serve as the checker base. Set a square
area for the checker base. Then set the output point for outputting the
coordinate position of the checker results. After the template area is
confirmed, the output point can be set anywhere inside the area using the
cursor lever. Press A: Tmp. Cnt. to set the point in the centre of the area.
22. Search Area
Set the search area in the photographed image. The checker will detect
objects that resemble the template within the search area.
Note
The search area can be set as a square area using the cursor
lever, but since setting the entire range of the photographed
image as the search area will slow down the image processing,
please set the search area as the necessary range. Position
adjustments make it possible to set a very limited search area.
Even in a very small search area, designating the matching
checker as a position adjustment group number allows the
inspection to be performed without deviating from the target
object.
9 − 4
OCR Type A230
Advertisement
