Advertisement
OCR Type A230
13.5 Spreadsheets
When executing, the total number of scans and errors, as well as the count, average,
dispersal value, maximum value, minimum value, and range of each of the OK and NG
outputs of the designated checker are counted and displayed. However, scans are not
counted unless at least one checker has been set.
The image cannot be changed once you enter the Spreadsheets menu, so if you wish
to be able to see a particular image, change to the required image before entering the
Spreadsheets menu.
3
(1)
(5)
GE0101
(3)
1.
Scan Times
Counts the total number of scans for all executions. However, the number of scans
will not be counted if no checkers are registered. The maximum count is
4,294,967,295. Scans that exceed this maximum will not be counted.
2.
Error Times
Counts the number of errors generated (number of times that the parallel error
signal was output).
3.
Reference checker
Sets and displays a checker for referencing.
Move the cursor to this location and press ENTER to display a list of the checker
numbers. Select the checker that you want to reference.
Up to a maximum of 40 checkers can be referenced.
39
10415
Inspection Results and Output
(2)
(4)
16.50
13.5 Spreadsheets
13 − 29
Advertisement
