Advertisement
Communications (Serial and Parallel)
16.8
Template (Smart matching) Re−registration
16.8.2
Communication Settings
Select [Communication] → [Parallel Output] → [Setting Template].
44.
Parallel Output
441.Handshake
Setting Template
No
442.Reset Cond.
Set. Pos.
443.Setting Template
Exe. Pos.
Adj. Pos.
444.Disp. Img. Change
Set the following:
− Whether or not to perform re−registration.
− The execution method.
Setting position
Re−registration is executed at the position set for the template area.
Because position adjustment and smart matching are not executed, re−registration is
not performed if the object or template image positions have moved.
Execution position
Re−registration is executed at the detected position after smart matching is executed.
Because position adjustment is not executed, re−registration is not performed if the
object position has moved.
If the template could not be detected when smart matching was executed (due to the
template image and re−registration image being different etc.), an error is generated
and re−registration is cancelled.
Adjustment position
Position adjustment is executed, and re−registration is performed after the smart
matching is adjusted. Smart matching is not executed, so the positional correlation
between the search area when the area was set and the template area is maintained,
and the image at this position is re−registered as the template.
16 − 42
Yes
Latch
No
Details Mode
OCR Type A230
Advertisement
