Advertisement
Useful Functions
15.1
Loading and Saving Image Data
(7)
Shows the numerical calculation result CA31 when the highlighted
image was saved. (Will not be displayed when the cursor is highlighting
the current image.)
(8)
Shows the numerical calculation result CA32 when the highlighted
image was saved. (Will not be displayed when the cursor is highlighting
the current image.)
(9)
Press C to return to the previous image.
Method for loading image data
Use the cursor lever to move the cursor to select the image you want to
load, and press ENTER. The selected image will be loaded, and you will
return to the previous screen.
15.1.2
Save Image Data
Save the currently−displayed image. If you select SAVE IMAGE DATA, the
following message appears:
If you select Yes, the image being displayed is saved. If you select No, the
image is not saved.
Note
After the current image is saved (without capturing the image), it
is not possible to save the same image again. The following
message will be displayed if you try to do this.
You can select from among four methods for saving images. Set the method
in the Environment menu.
15.1.3
Lock Image Data
Lock and unlock saved images. When using the Lock Image Data function,
as when using the Load Image Data function, 8 reduced−size screens are
displayed. Move the cursor to set or remove a lock on a desired image. Select
the image, and then press A to set or remove a lock. The ENTER button does
not work in the Lock Image Data screen.
15 − 4
OCR Type A230
Advertisement
