Table of Contents
Advertisement
2.4.3
Operator
The operator has been instructed on the safe operation of the product in an
application and on potential dangers. After production release by the competent
safety specialist of the owner, the operator may perform the following tasks:
• Switching the product on and off.
• Start programs and automatic sequences.
2.4.4
Maintenance/service technician
The maintenance and service technician has been instructed on safe product
operation and product maintenance and troubleshooting.
The maintenance and service technician may perform the following tasks:
• Operating the product in manual mode.
• Programming and editing programs and automatic sequences.
• Troubleshooting, maintaining and servicing the product.
For the work of the maintenance/service technician, the following mandatory
training courses at the BCI Training Center are required:
Designation
Basic course "Safe handling"
Advanced course "Sensor skin maintenance"
Advanced course "Preparation of work schedules"
Advanced course "Integration into projects"
You can find an overview of the current training courses and training content
online at: https://www.bosch-apas.com/downloads/.
2.5 Installed safety equipment
The APAS assistant has the following safety equipment:
• Sensor skin on axis segments 1-5 of the APAS assistant
• Sensor skin on the rotary union
• Robot controller
• Safety module: Analysis unit of the capacitive sensor skin, safety PLC for the APAS
assistant (PROFIsafe and discrete signals)
• Signal lamp to display the current state of the APAS assistant
• Handheld programming device (HPD) KUKA smartPAD with integrated
EMERGENCY STOP button
Additionally, the hose breakaway device for the use of pneumatic lines can be
installed. For further information see the hose breakaway device data on p. 25.
2.6 Personal protective equipment
The following protective equipment must be worn at all times:
• Protective goggles during setup operation (scope of delivery)
In the context of a specific application, safety risks can arise in collaborative
operation with the APAS assistant. These safety risks must be considered in
the risk assessment for this application and mitigated by accordingly derived
measures. These measures can include wearing further personal protective
equipment.
3 842 565 050/2019-11 APAS assistant K1100-10i V01.00.00 - V01.00.99, Bosch Rexroth AG
Safety instructions
Reference code
[BCI-SP-AP031]
[BCI-SP-AP015]
[BCI-SP-AP038]
[BCI-SP-AP037]
13/68
Advertisement
Table of Contents
