Show Events Faults Config; Show Events Faults Status - Siemens SIMATIC NET Configuration Manual

Diagnostics
11.1 Diagnostics
11.1.1.4

show events faults config

Description
This command shows the current configuration of the following error monitoring functions:
● Monitoring of the power supply for power outage
● Monitoring of the network connections for a change in the connection status
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show events faults config [{link}]
The parameters have the following meaning:
Parameter
link
If no parameters are specified, the settings for error monitoring are displayed.
Result
The current configuration of the selected error monitoring function is displayed.
11.1.1.5

show events faults status

Description
This command shows the status messages of fault monitoring of the power supply and
network connections.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
436
or
cli#
Description
Monitoring of the network connections for a change in the connection
status.
or
cli#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05